Paul's Blog

Paul's Blog

Home

Syndication

Archives

Sort by: Most Recent | Most Viewed | Most Commented

Micromark 7x14 Lathe

I've been working on a new height modification for my Lawn Robot - the Lawnbott Evolution 3210 - and I started to get into some things that I couldn't do without a lathe. So, I started researching around and finally settled on the Micromark 7x14...

Published 02-10-2010 12:34 PM by Paul

Filed under: Lawnbott Evolution, Lawnbott, Lawnbott 3200, Metal working, Lathe, 7x14 Lathe, Metal cutting lathe, Metal turning, Micromark, Lawnbott 3210, Slotter Attachment, Lathe Slotter Attachment
Lawnbott Modifications Update

I've spent quite a bit of time tinkering with the robot over the past several months since the growing season started. I've made a few adjustments to the design of the bearings and gears which I've outlined below: - The spacing of the gears...

Published 06-15-2009 2:59 PM by Paul

Filed under: Lawnbott Evolution, Lawnbott, Lawnbott 3200
Lawnbott 3200 Modifications

Introduction Ever since I bought the Evolution 3200 mower, I've been wishing that I could raise the cutting height higher than the robot allows. I've always preferred my grass to be on the higher side. So, after two seasons of robotic mowing,...

Published 01-21-2009 9:38 PM by Paul

Filed under: Lawnbott Evolution, Lawnbott
Lia and Ava Speak

Here are some of the funny things that Lia and Ava have said over the years . . . . . . Enjoy 2001 Lia stated, "Apples for eating, buttons for buttoning, hats for . . . (thinking for a few seconds) . . . hatting!" 2001 Lia commented, "I'm...

Published 12-03-2008 10:41 PM by Paul

Paul's Blog

Syndication

Recent Posts

Tags

Archives

Micromark 7x14 Lathe

Lawnbott Modifications Update

Lawnbott 3200 Modifications

Lia and Ava Speak